Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Evanston, WY

Garaga Garage Door Roller Replacement in Evanston, WY

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. Typical cost $150-$350.

When your door needs Garaga garage door roller replacement, you want it done safely and right the first time. Typical jobs in Evanston, WY cost $150-$350, and you approve the price first. Worn steel or plastic rollers swapped for quiet, sealed nylon rollers. We work on Garaga garage doors of every age, from older models to current lines, and carry or can source compatible parts. Garaga is a Canadian garage door manufacturer based in Quebec.

Signs you need Garaga garage door roller replacement

  • Grinding, squealing or rumbling as the door moves
  • The door shakes or jerks in the track
  • Cracked, chipped or wobbly rollers
  • Rollers that no longer spin freely

Common causes

  • Worn-out bearings in steel rollers
  • Cracked builder-grade plastic rollers
  • Rust or dust packed into the bearings

What you can check yourself

  • Watch the rollers while the door moves. They should roll, not slide.
  • Look for cracked plastic wheels or wobbling stems.
  • Leave the bottom rollers to a technician. They sit in brackets that hold cable tension.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our Garaga garage door roller replacement process

  1. Inspect every roller, hinge and track section
  2. Replace rollers one hinge at a time, with sealed nylon rollers for a quieter door
  3. Replace the bottom rollers safely with tension controlled
  4. Lubricate hinges and bearings
  5. Test for smooth, quiet travel

Garaga Garage Door Roller Replacement cost in Evanston, WY

$150-$350Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Garaga services

Garaga Garage Door Roller Replacement in Evanston, WY

Large daily temperature swings in Wyoming work hinge screws and track bolts loose, which leads to noise, wobble and eventually an off-track door.

Our Garaga garage door roller replacement service covers Evanston (ZIP codes 82930 and 82931) and nearby towns including Lyman (35 mi), Morgan, UT (40.4 mi), Kemmerer (42.4 mi) and Mountain Green, UT (43.9 mi). Call (833) 435-8883 to book a visit in Evanston.

Garaga Garage Door Roller Replacement: frequently asked questions

How much does Garaga garage door roller replacement cost in Evanston, WY?

Garaga Garage Door Roller Replacement typically costs $150-$350 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Garaga garage door roller replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Garaga garage door roller replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Garaga warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Wyoming or Evanston requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Evanston, WY

Overhead Door Garage Door Opener Installation

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $350-$800

Genie Garage Door Opener Installation

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $350-$800

Windsor Door Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Commercial Overhead Door Installation

Commercial sectional, insulated and high-cycle doors and operators installed.

Typical $2,500-$12,000

Raynor Garage Door Panel Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $300-$900

Ideal Door Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Opener Circuit Board Replacement

Failed logic boards and receivers replaced, often after a power surge.

Typical $175-$400

Clopay Garage Door Cable Repair

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $150-$350

Garaga Garage Door Cable Repair

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $150-$350

Sommer Garage Door Opener Installation

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $350-$800

Richards-Wilcox Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

CHI Overhead Doors Off-Track Garage Door Repair

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $175-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Evanston, WY now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote